Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: harliquin76 on February 13, 2009, 08:38:42 PM
-
I am not sure why but I always have trouble clicking down the thumb sticks and keeping the stick center. is there a way I could mod my controller to place a button underneith like where people put thier rapid fire buttons that reproduce the click down on the thumb?
I know how to solder and stuff, just not sure the schematical layout of the thumb controller, like which contacts connect when you push it down. any help would be great!!!
-
if you want to make a button to click for the left stick
you need to remove the left trigger and directly underneath the button are the four pins for its tact switch
for right stick its easy just do the same but without removing the trigger of course.
PICTURES FROM LLAMA, NOT MY OWN
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv160%2Fjeremydammit%2Fleftthumb.jpg&hash=272b9bf9b10a8265589af8a96e9521d6d814a7c1)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg.photobucket.com%2Falbums%2Fv160%2Fjeremydammit%2Frightthumb.jpg&hash=8be32e4f14680c62482e02a625cfffa0f625b0a9)
-
these are accessable without pulling the trigger, if you got skills LOL
-
no need to pull trigger (might be easier). you can always tack wires to the spots he shows in the pics, or on the switches themselves on the other side of the board.
-
i guess you could if you didnt use my soldering iron
LOL
my iron doesnt have a tip anymore
-
LOL I use a big 12" file to create a new point. you may want do this when the iron is cool though LOL