Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: pspupgrade on February 14, 2009, 07:24:51 AM
-
Hi. I've been attempting to cut this 8 way DIL switch. There's a picture of it below. It doesn't seem to be working too well with a knife.
Does anybody here know the best way to cut these annoying switches?
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg.auctiva.com%2Fimgdata%2F2%2F7%2F7%2F4%2F6%2F1%2Fwebimg%2F221184771_tp.jpg&hash=633d9d09b7168d2ea1fb738cd89b6f9e9e91cedc)
-
Use a dremal with a cutting bit. works for me.
-
Use a dremal with a cutting bit. works for me.
Eek, I don't have a dremel. Are there any other methods?
-
Drwmmel would be by far the best. You cam get one at your hardware store for not to much money.
Also you could try heating up the knife. When I was at my hobby shop a bit ago they had a tool that could come in handy. It was like a soldering iron with an exacto blade tip. It was made for cutting foam and plastic parts so it should work. It was 30 watt so it should get plenty hot enough. Best of all it was only like $8.
-
If you happened to have a hack saw, this can also do the job but you need to have a steady hand. Is not that hard.
-
yeah ive cut them with a hack saw, it takes forever and is kinda danderous but it gets the job done :drunk:
-
well if you don't have a dremmel..
try heating your knife then cut through the switch..
then smoothen your switch edges :tup: