Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: SGT-sys32 on February 21, 2009, 08:23:08 PM
-
first of all, thank you all. i succesfully transfered my psp into a crystal clear bule case. :) thanks to the tutorials on here.
second part....0603 leds...are tiny! how am i suppose to soldier the wire to it...ther are like the size of a pin head. or do i have the wrong ones? coz i dont know how on earth... i tried with flux but the bits are just too small. any help or links to the correct leds(blue,and ebay please)
-
You got the right LEDs. they are about 1.1mm small.
-
K well basically what I do is, I take a piece of cardboard, use masking tape and stick it to the bottom of the cardboard so there's a bit of it sticking out, and then I put the sticky side up. Then I place my led down with the solder points facing up, tin the points, grab some wire, tin that, and solder it on. I use tweezers while I'm at it to hold it down.
here:
http://www.youtube.com/v/V18LednEBZA&hl=en&fs=1
Vid by L0rdNic0