Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: atomicareprise on March 01, 2009, 09:08:06 AM

Title: pobo busted??
Post by: atomicareprise on March 01, 2009, 09:08:06 AM

i'm doing my led mod then when i turning it on it wont go through...

the green lights just light in a flash then it turns off..

i also scratch the trace of my pobo coz im planning to do face button mod..

but i did not finish it coz im too lazy scratching the trace :tup:

i also did the usb charge mod.

so why is my pobo acting up..what might be the cause???

i don't think there is shorting coz i disconnect all the wires to

make sure that there is no short.

Title: Re: pobo busted??
Post by: GhoSt on March 01, 2009, 09:35:39 AM

usually when it flashes on for half a second then turns off that DOES mean there is a short somewhere. Hopefully nothing is screwed, try starting from scratch.

Title: Re: pobo busted??
Post by: gamerdude767 on March 01, 2009, 09:42:07 AM

make sure you havent got odd bits of solder where there shouldnt be as this could be causing your short..

Title: Re: pobo busted??
Post by: atomicareprise on March 01, 2009, 09:49:48 AM

i remove all the bits and have my mobo and pobo then connect on my charger

but nothing happens..it just flashes...

Title: Re: pobo busted??
Post by: psp339 on March 01, 2009, 10:06:47 AM

Maybe a fried mobo? Same thing happened to me once and the mobo is now dead.

Title: Re: pobo busted??
Post by: atomicareprise on March 01, 2009, 10:45:08 AM

fried?but i made it turn on until i'm putting my face plate back..

Title: Re: pobo busted??
Post by: Jumbo on March 01, 2009, 10:51:14 AM

Its a short then

Title: Re: pobo busted??
Post by: PhenomenalDesigns on March 01, 2009, 11:15:01 AM

Quote from: atomicareprise on March 01, 2009, 10:45:08 AM

fried?but i made it turn on until i'm putting my face plate back..

I hate it when that happens.

Route the wires where something already is (Mobo?) so it wont be crushed and shorted by the lcd frame

Title: Re: pobo busted??
Post by: atomicareprise on March 01, 2009, 11:55:59 AM

thanks guys for your help..

i disassemble again my psp..and what do you know..

my psp works fine now..

btw how do you guys place leds on your d-pad?

cause my d-pad feels funky...

i have to redo my mod again :tup:

anyways thanks guys..

Title: Re: pobo busted??
Post by: PhenomenalDesigns on March 01, 2009, 01:49:34 PM

Quote from: atomicareprise on March 01, 2009, 11:55:59 AM

thanks guys for your help..

i disassemble again my psp..and what do you know..

my psp works fine now..

btw how do you guys place leds on your d-pad?

cause my d-pad feels funky...

i have to redo my mod again :tup:

anyways thanks guys..

Good to see the motherboard isnt broken (I hate when mine breaks, they cost quite a bit)

When I put LEDs in the D-Pad i usually just drill a hole when you already have a 'bump', and hotglue it there (I use clear buttons)