Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: demonicfox666 on March 01, 2009, 12:22:53 PM
-
ok i have recently got 2 preowned psps and there is a lot of dust under the screen, how can i get rid of the dust and muk then put my screen back on without getting more under it as i put the faceplate back on. thanks
-
just take off the faceplate then clean the screen and faceplate with alcoholic swabs making sure you dont leave finger prints on there.. then put the faceplate back on and tighten you screws.. and hopefully it would get dusty again :hifive:
-
thanks but its seems to be when im puttin the screen back on that stuff just appears on my screen out of nowhere
-
thanks but its seems to be when im puttin the screen back on that stuff just appears on my screen out of nowhere
Get a can of compressed air, quickly wipe both sides, then spray (not too much) then close straight away and lock it up, perfecto!
Reason why sony, and other electrical manufacturs never get dust under any screen is because they always work in these dustproof labs (One spec of dust could cost thousands)
-
ok thanks :hifive:
-
what also help is if you put ona white background, while its open, turn it on with the white background, get all the dust, then turn if off, put screws, see it again
thats what i do, And my screen comes out pretty clean
-
thanks for the tips
-
I haven't used this method but i heard you can use some tape to remove some fine dust on the screen maybe with one that leaves little residue