Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: GhoSt on March 03, 2009, 12:53:00 AM

Title: GhoSt needs urgent help
Post by: GhoSt on March 03, 2009, 12:53:00 AM: ok modding this controller for my mate, using a pic programed with burnmeup2 (one of hazers codes) when I start the controller now it will no longer sync with the xbox. Any ideas, the pic works as when I hold sync for 5 secs it turns on P4 led inbetween blinks.

I wired it like this. Only leaving out everything coming off pin 6 (purple one)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi249.photobucket.com%2Falbums%2Fgg221%2FGhoSt-Death%2FEasyMATRIXsleeper.jpg&hash=d9d0467c28a3f2d24551adad13d976d60f70532b)

Yea im fully :censored: ing my pants right now so any help will be graciously accepted.
Title: Re: GhoSt needs urgent help
Post by: Ghost In Black on March 03, 2009, 02:38:29 PM: Um, not sure but I've had a few times when a wire came loose or got shorted out.
Title: Re: GhoSt needs urgent help
Post by: bustinthejustin on March 03, 2009, 04:44:59 PM: Would wiring up pin 6 affect anything? What's it for? The other trigger?
Title: Re: GhoSt needs urgent help
Post by: GhoSt on March 03, 2009, 07:25:56 PM: Quote from: bustinthejustin on March 03, 2009, 04:44:59 PM
Would wiring up pin 6 affect anything? What's it for? The other trigger?

I assume so.

my solder joints are all good, I belive hazer has my anwser but he hasn't been on the forums for a few days...

Edit: Flag that hazer didn't know, desoldered the snyc... didn't work. Hmm I gona have to sacrifice my own cg so my freind can have a working controller :(
Title: Re: GhoSt needs urgent help
Post by: tikboy1964 on March 05, 2009, 05:40:49 PM: any luck
Title: Re: GhoSt needs urgent help
Post by: GhoSt on March 05, 2009, 07:36:16 PM: no ripped up my controller and it worked on that, Now im controllerless.
Title: Re: GhoSt needs urgent help
Post by: Modded Matt on March 06, 2009, 04:32:54 AM: it must have something to do with the sinc button. I hate dealing with it. I had a similar problem with mikes 7.99 chip back in the day.. my issue was a small piece of solder grounding to sinc pin I could not even see it until I put it under my magnifying glass.
Title: Re: GhoSt needs urgent help
Post by: GhoSt on March 06, 2009, 12:59:27 PM: Quote from: modded matt on March 06, 2009, 04:32:54 AM
it must have something to do with the sinc button. I hate dealing with it. I had a similar problem with mikes 7.99 chip back in the day.. my issue was a small piece of solder grounding to sinc pin I could not even see it until I put it under my magnifying glass.

Yea I will take the board into my dads work this weekend and look at it under the microscope.