Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: atomicareprise on March 04, 2009, 09:54:47 PM

Title: led power swap problem- solved
Post by: atomicareprise on March 04, 2009, 09:54:47 PM

so i did my led swap in pobo...

i did this mod to mine and doing this mod to my brother..

what my problem is my light power leds wont light up but my

charge led lights up...what could be wrong???

Title: Re: led power swap problem
Post by: rceckspurt13 on March 04, 2009, 10:11:56 PM

1. The power led is not properly connected ex: beckeards polarity or ground or positive is not connected.
2. You may have burned the led if you heated it too much while trying to solder it. I did this a few times.

Try switching the polarity and if it still doesn't work then switch it with another.

Title: Re: led power swap problem
Post by: atomicareprise on March 04, 2009, 10:51:32 PM

i made it turn on both power/charge led but some how

it just the charge led remains to light up...

i'll just do it again :tup:

thanks rceck..