Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: PhenomenalDesigns on March 05, 2009, 11:32:31 AM
-
How do you guys sometimes get it so neat? For example, Arioch_76...
EXAMPLES:
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Farioch76.free.fr%2Fnaga%2F2.jpg&hash=e713631f5c7dcc2e89e825ab0844be85523292e8)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Farioch76.free.fr%2Fnaga%2F3.jpg&hash=10b6dd44e1f19a70f51be664980eea730df89a27)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Farioch76.free.fr%2Fnaga%2F4.jpg&hash=7769036fbbd774c92a433c0b2174774fa9670de0)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Farioch76.free.fr%2Faripsp%2F3.jpg&hash=2a0793a2ecee4669d1ee9fd02e58f7625284ddd3)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Farioch76.free.fr%2Faripsp%2F4.jpg&hash=a404f6160716743e50a7ff3e207450490f78b5d6)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Farioch76.free.fr%2Faripsp%2F8.jpg&hash=ebe43e9da27b9cde7bcb326f5efe0ebc11fb4947)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Farioch76.free.fr%2Faripsp%2F14.jpg&hash=abca72fa834fd7850a25d6112b8d9abb564d6aa9)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Farioch76.free.fr%2Faripsp%2F18.jpg&hash=5257c0a6bd2a30f499a5894a1d0141691bdc262a)
So pretty much... Whats the best way to get the wires neat? (I espeically need to know how to get them neat in that white UMD door, where they are all flat.
-
He super glues them
-
Model Car glue works just as well.
-
Yeah I always wonder that too. Any specific brands of superglue?
-
Super GLue kind :D I use nail glue too (Salons use it)
-
i use hot glue but hold up a bit of card so it dosent go all over that lovely jewel.
-
I glue at intervals, rather than over the lot so if I screw up its not that hard to undo.
-
http://superglue.supergluecorp.com/sgh2.html (http://superglue.supergluecorp.com/sgh2.html)?
-
Yep that stuff is the best. It's so versatile. Just go down to your local dollar tree store and pick up a tube for $.99. Or you can get it at any 711 by a different brand but it's more expensive.
-
I like using hot glue gun cuz its easy to take off if you need to. Just use a hair blow dryer and remove it without any residue left over.
-
Yeah that's true too, but I guess there's two sidesto every story. Also superglue will leave a white residue if your not careful.
-
I like using hot glue gun cuz its easy to take off if you need to. Just use a hair blow dryer and remove it without any residue left over.
Oh really? you can remove it that way? I've never known that. Thanks for the info.
Also you can use model glue, it's nice, it's like a gel but it 100% transparent when it dries it also leaves no residue, unlike superglue and hot glue turns a foggy white when it dries.
Personally I would use a dab of hot glue on the bottom of the LED BEFORE applying it to your surface so you don't use too much.
-
I use hot glue, and right after applying a dab, I press it in with my finger to make it flat.