Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: tapdisbong on March 10, 2009, 01:28:51 PM
-
hey, what size drill bit should i use to drill a hole in the psp case to fit the camera in ? (i don't have a dremel) and where can i get a slide switch to switch between the camera and usb connection ?
-
I dont know which size drill bit I used, but you just start with really small one and work your way up. As far the switch, Rat Shack has some.
Are you doing this mod on a phat?
-
ya i'm going to do it on a phat, and if everything goes well possibly moving onto a slim afterwards. i was looking into radioshack i don't know if these are the rite sizes tough.... http://www.radioshack.com/product/index.jsp?productId=2062490&tab=techSpecs (http://www.radioshack.com/product/index.jsp?productId=2062490&tab=techSpecs). do you have a diagram to install it ?
-
Where are u gonna put it at on the phat? UMD area, or WIFI/MS area? Yeah those are the slide switches. U dont really need a diagram, you pretty much just solder wires, respectively where they should go and wire up the switch on d+.
-
Under the wi-fi area. did you do this mod already ? if you did what would you rate the difficulty on this ? (1 to 10)
-
i havent done this but i heard its hard to take the cam apart. probably not too difficult but definitely not something u would want to jump right into.
-
Taking apart the little camera isn't that bad. There's like 3 screws and the rest u just pry off. Soldering wires to the cameras USB port is also easy. Soldering to the usb mobo is a little tougher though, just gotta be patient.
Here's a good info on this mod on a phat:
http://www.pspgen.com/forums/viewtopic.php?f=44&t=111610 (http://www.pspgen.com/forums/viewtopic.php?f=44&t=111610)
-
o0 thanks i just need to get some extra money. this mod looks like it shouldn't be to hard.