Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: EliteGamer83 on March 14, 2009, 09:03:31 PM
-
I am going to try this as I see the only thing on here about it is the UNremovable PSX controller mod, well I am going to try a removable one! I haven't wired out the analogs in my diagram but I will use the USB dual analogs tutorial for that...
Is this Correct? also does anyone have the PCB pimout for the PS2 controller? anyone here with a multi-meter and some free time this about greatly be appreciated
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi283.photobucket.com%2Falbums%2Fkk303%2FSWITCHFOOTRZ%2F4545d.jpg&hash=d9550fba65f95ccfbce6c7c059bcec738e913cc3)
-
elite this is a little offtopic but i want to try to make a removable umd drive. Basically it should just involve extension of the ribbon cable and making a male/female connection, right ? Opinion ?
-
No analog?
-
Can you not read lol? I said I did not add the analog(s) in my pic
But I can do it like that right? do I just follow the USB analog for PSP tutorial except insted of adding a USB just put it back in the controller then?
Also I wonder how I would wire dual analogs via PS2/PSX controller...
But is my "wiring" correct on this?
If I use the slim pinout and solder to those points but I still need a PS2 PCB pinout...
-
Looks ok.
You should add a common ground.
Make things easier.
To my knowledge there was one person working on this.
He had good progress.
I wish you good luck man.
Thats gonna be some fun soldering.
-
No triggers?
-
you got no ground.
-
Here is this better?
Also do Dualshock 1 and Dualshock 2 analog sticks work the same? cause I might have to get a Dualshock 1 cause no one knows the PCB pinout for the DS2 but we do know the pinout for DS1
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi283.photobucket.com%2Falbums%2Fkk303%2FSWITCHFOOTRZ%2Ftriaggsa.jpg&hash=863ddf9014550e45c13145f1cf0503ab6f5ed6b5)