Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Topic started by: ramoneybling on March 21, 2009, 09:00:00 AM
-
Ok I have a New Problem. Error Code E64...
Ok I Have 2 xboxs, one doesnt have the Cables that connect it to the dvd drive. The one that oringally have the dvd cable cords conecting it to the Xbox, dvd drive is not being read on the xbox.I click the Open disk button so many times, and the disk drive doesn't open or respond to anything I do to it. I turned my Xbox off and turned it on, clicked the Open tray button, Still It doesnt open. I disconnected the dvd cable cords and reconnected them again, Still it doesnt read it.
I wanted to see if it is my Dvd drive acting up or the cords. So i took the dvd cable cords and put it on my other xbox dvd drive, and it ened up getting error E64. When i disconnect it and restart the system, it starts normally. I dont know why this is happening.
What I notice: The samasung Dvd drive (the one that worked but out of no where started not to read the dvd drive) Smells kinda of funny. Smells like Fried eletricty.
Help Please
-
you would need to spoof the firmware / keys of the DVD drive to get it to work on the other xbox
-
okkkkkk so how do i do that....
-
Not tryn' to be a :censored: or anything, but try using the search button or google it. you will find it i guarantee it
-
Why Can't You just tell me here, it will make my life much easier comming from people who had already flashed their dvd drive...
-
Here you go :) :
http://www.se7ensins.com/forums/hardware-customizations/82304-replace-spoof-xbox-360-dvd-drive.html (http://www.se7ensins.com/forums/hardware-customizations/82304-replace-spoof-xbox-360-dvd-drive.html)