Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: killdog on March 24, 2009, 08:03:15 AM
-
How would u do SR leds with a 2n2222 tranistor?
-
its ok now i found the tut at last lolz but another problem do u really need to use the 100ohm resitor for 2.6v red leds
-
yes, unless you want to blow your leds. i didn't any resistor with six green leds but however as red leds require less power then i would recommend using one.
-
you dont happen to have a 100ohm i can have do ya?
-
just buy them from mouser... even radioshack usually has them.
-
Or you can try Maplins if you have one in your town. they have them. Sorry K.D. I only have a few left and i'm gonna need them for a mates console.
-
man im must be lucky cuz i have store near me that has like 100s of kind of resistors and all kinds of electronics parts and so on
-
i do aswell but i prefer to buy offline lolz i have a maplins not far away like im in stonehouse and i think its out camals head which is quite far away without a car but i mite get my mum to drive me there.
-
Nice seems almost everyone does for the most part. Well good luck on this project let us know how it goes.
-
got the resitors today and a speaker and some switchs and ive got my 2n2222 transitors and my 50 red leds but how should i wire the leds Series? or paralell
-
parallel cuz you cant us series cuz of the voltage you have may not be enough