Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: EliteGamer83 on March 27, 2009, 04:39:56 PM

Title: Removeable Rumble Mod! Will this work??
Post by: EliteGamer83 on March 27, 2009, 04:39:56 PM: I bought the talkman mic and I hardly ever use it, and I was researching the rumble mod, but I thought of this instead to save space inside the PSP and just in case so the motor doesn't hit any parts inside the PSP. Is this correct? and what do you think will this work? it would feel ok too?

It doesn't have to be on the top, anywhere where it can fit.

I found teh parts,

Vibration Motor: http://www.precisionmicrodrives.com/product_info.php?products_id=86 (http://www.precisionmicrodrives.com/product_info.php?products_id=86)
USB Plug (already have male): http://www.sparkfun.com/commerce/product_info.php?products_id=587 (http://www.sparkfun.com/commerce/product_info.php?products_id=587)

Schematics:

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi283.photobucket.com%2Falbums%2Fkk303%2FSWITCHFOOTRZ%2FinsidePSPvibrate.png&hash=e41b537641e96028a6fac1e2ad11df57f64c1892)

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi283.photobucket.com%2Falbums%2Fkk303%2FSWITCHFOOTRZ%2Fremobablerumblefront.png&hash=bc2e3f09746bd97964a5756b256804d7e88d8429)

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi283.photobucket.com%2Falbums%2Fkk303%2FSWITCHFOOTRZ%2Fremovablerumbletop.png&hash=aab135d3d6e8f7dd1a134f9e02a698a74318fe7f)
Title: Re: Removeable Rumble Mod!
Post by: EliteGamer83 on March 27, 2009, 04:58:57 PM: Never mind it's dumb please lock (https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fboardsus.playstation.com%2Fi%2Fsmilies%2F16x16_smiley-sad.gif&hash=f71b1c3ede363bae933785248173a30b82f99850)
Title: Re: Removeable Rumble Mod!
Post by: robin1989 on March 27, 2009, 05:08:49 PM: its not a dumb idea - its a good way and depending on how you worked it would allow for improvments in it all without needing to take apart the psp. plus you dont always want ot have rumble so it makes it removeable and leave room in the psp for more mods
Title: Re: Removeable Rumble Mod!
Post by: alentris on March 27, 2009, 05:27:12 PM: Just one thing - why is this in the 2000 section when your diagram uses the 1000 ?
Title: Re: Removeable Rumble Mod!
Post by: Tri-edge on March 27, 2009, 05:41:47 PM: can't you do this with the headphone jack? that way you don't even need to take the psp apart
Title: Re: Removeable Rumble Mod!
Post by: EliteGamer83 on March 27, 2009, 06:17:12 PM: Maybe...

But then unless I re-wired the whole sound system on the PSP then you wouldn't hear any sound coming from the speakers cause your PSP would think you plugged in headphones.

Thanks for the suggestion though I never would have thought of that.
Title: Re: Removeable Rumble Mod! Will this work??
Post by: EliteGamer83 on March 27, 2009, 09:15:42 PM: BuMp?
Title: Re: Removeable Rumble Mod! Will this work??
Post by: Tri-edge on March 27, 2009, 09:46:08 PM: Quote from: EliteGamer83 on March 27, 2009, 06:17:12 PM
Maybe...

But then unless I re-wired the whole sound system on the PSP then you wouldn't hear any sound coming from the speakers cause your PSP would think you plugged in headphones.

Thanks for the suggestion though I never would have thought of that.
get one of those speaker grips and wire it to that. Infact I think I happen to have a grip that will work perfectly for this, I just need the rumble motors and a schematic
Title: Re: Removeable Rumble Mod! Will this work??
Post by: EliteGamer83 on March 27, 2009, 09:50:31 PM: What is a better motor?

This: http://www.precisionmicrodrives.com/product_info.php?products_id=171 (http://www.precisionmicrodrives.com/product_info.php?products_id=171)
OR this: http://www.precisionmicrodrives.com/product_info.php?products_id=86 (http://www.precisionmicrodrives.com/product_info.php?products_id=86)
Title: Re: Removeable Rumble Mod! Will this work??
Post by: EliteGamer83 on March 27, 2009, 10:25:22 PM: Quote from: Tri-edge on March 27, 2009, 09:46:08 PM
get one of those speaker grips and wire it to that. Infact I think I happen to have a grip that will work perfectly for this, I just need the rumble motors and a schematic

Also sorry for double post, but is this what you meant?

http://www.dealextreme.com/details.dx/sku.10835 (http://www.dealextreme.com/details.dx/sku.10835)

Dude, It seems like DX is not restocking anything... I see some stuff that has been "sold out" for a few years there used to be alot more stuff.
Title: Re: Removeable Rumble Mod! Will this work??
Post by: Blazinkaos on March 27, 2009, 10:44:13 PM: yea cuz there prices are like so good..
Title: Re: Removeable Rumble Mod! Will this work??
Post by: Tri-edge on March 27, 2009, 11:04:39 PM: Quote from: EliteGamer83 on March 27, 2009, 10:25:22 PM
Also sorry for double post, but is this what you meant?
No, but any old grip should do as long as you have room inside for everything. I have a old grip that has a fan on the back and it had some rechargeable batteries inside. I got it from my brother because it didn't work unless it was plugged in, so I just gutted it and salvaged parts for later use.
Title: Re: Removeable Rumble Mod! Will this work??
Post by: Blazinkaos on March 27, 2009, 11:07:04 PM: yea anything is always a good use like i had those portable cd players that you can cary around the big ones. i use the resistors and i even got potometer out of the ones used in the 555 timer 360 controller.
Title: Re: Removeable Rumble Mod! Will this work??
Post by: EliteGamer83 on March 28, 2009, 07:32:33 AM: Quote from: EliteGamer83 on March 27, 2009, 09:50:31 PM
What is a better motor?

This: http://www.precisionmicrodrives.com/product_info.php?products_id=171 (http://www.precisionmicrodrives.com/product_info.php?products_id=171)
OR this: http://www.precisionmicrodrives.com/product_info.php?products_id=86 (http://www.precisionmicrodrives.com/product_info.php?products_id=86)
Title: Re: Removeable Rumble Mod! Will this work??
Post by: Tri-edge on March 28, 2009, 09:51:54 PM: What's the difference between the two?
Title: Re: Removeable Rumble Mod! Will this work??
Post by: EliteGamer83 on March 28, 2009, 09:54:42 PM: I think the 1st one has better weight distribution for more rumble and the second one looks more like just a slight vibrate the way the weight is positioned. Also do you think this will this screw my UMD drive? like mess with the laser/lens.
Title: Re: Removeable Rumble Mod! Will this work??
Post by: Blazinkaos on March 28, 2009, 10:39:54 PM: i didnt look at the spec does it say that about them
Title: Re: Removeable Rumble Mod! Will this work??
Post by: GhoSt on March 28, 2009, 11:03:52 PM: first one looks better.
Title: Re: Removeable Rumble Mod! Will this work??
Post by: Blazinkaos on March 28, 2009, 11:06:47 PM: well if ghost says so then yea
Title: Re: Removeable Rumble Mod! Will this work??
Post by: EliteGamer83 on March 29, 2009, 06:54:15 PM: Do you think this will this screw up my UMD drive? like mess with the laser/lens. I heard someone say that the vibration is not good for the PSP UMD drive.
Title: Re: Removeable Rumble Mod! Will this work??
Post by: GhoSt on March 30, 2009, 01:05:59 AM: who needs UMD's *cough*. lol it should be alright, you will know if it scratches a disk :)
Title: Re: Removeable Rumble Mod! Will this work??
Post by: EliteGamer83 on March 30, 2009, 06:25:00 AM: Quote from: GhoSt_Death on March 30, 2009, 01:05:59 AM
who needs UMD's *cough*. lol it should be alright, you will know if it scratches a disk :)

I'm saving up to buy all my other modding supplies before I can get a Pandora and I know you will say you can make your on but I don't want to short out my battery if I do it wrong, then that will be even more $$.

Also is 3v ok for the motor? like is that ok to have a 3v?
Title: Re: Removeable Rumble Mod! Will this work??
Post by: GhoSt on March 30, 2009, 08:34:17 PM: you only get a max of 2v across the transistor on a phat without a resistor. So I would go with a 1.8v rumble motor.
Title: Re: Removeable Rumble Mod! Will this work??
Post by: EliteGamer83 on March 30, 2009, 08:58:19 PM: Quote from: GhoSt_Death on March 30, 2009, 08:34:17 PM
you only get a max of 2v across the transistor on a phat without a resistor. So I would go with a 1.8v rumble motor.

It would be on a slim though, and then why is it called a 5v?
Title: Re: Removeable Rumble Mod! Will this work??
Post by: GhoSt on March 30, 2009, 10:06:03 PM: technically its not 5v the way we are using it, its 5v between ground, I just stated it as that because then people know where to solder to. Use a multimeter across the rumble/leds on it and you will see it staying around 1.7v

Btw: it doesn't matter if its a slim.
Title: Re: Removeable Rumble Mod! Will this work??
Post by: Blazinkaos on March 31, 2009, 11:19:19 AM: yea changed power here and there...
Title: Re: Removeable Rumble Mod! Will this work??
Post by: EliteGamer83 on March 31, 2009, 11:22:15 AM: Ok, thanks Blazin and Ghost

I'll start as soon as I get a new mobo or sell the one I have on ebay tonight. I'm trying to get another PSP in line though before I sell it, I emailed like 15 people on craigslist this morning lol so I'll wait a day or two for a reply(s) then if those people still have them I'll list it on ebay.
Title: Re: Removeable Rumble Mod! Will this work??
Post by: Blazinkaos on April 05, 2009, 05:29:16 PM: yea just give us a update on it