Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: bustinthejustin on April 01, 2009, 02:44:00 PM
-
Gah did a case swap, and first of all, I have to say... GOD I HATE RIBBON CABLES! I killed like 5 of those things already. It seems that everytime I pry the triggers off the case I end up breaking it. So when I go into text entry or something, the busted ribbon cable spams the trigger. Also, it might be the case, but whenever i put pressure right under the screen near the home bar, the part of the screen directly above that turns black from the pressure, like if you were to have a calculator and you pressed hard on the screen. I THEN lost a screw... Damn I suck lmao.
Anyway, anybody got a good way of removing ribbon cables from the psp, and anybody have any ideas for fixing the case problem with the screen?
Thanks,
Bustin
-
I just lift em up with my finger slowly, never had a problem..
1700th post D:
-
Damn... Oh well, I'll just buy more :(. For the right cable where it's like completely stuck to the psp I think I will definitely break it :(... On the plus side, I fixed this blacking out problem I had.
-
Yeah I never have problems with the connectors, just be careful and do it slowly when you do it. If it makes you feel better you can use tweezers lol.
-
oooh I have tweezers! Lol thanks... I'll try not to kill them next time.
-
oooh I have tweezers! Lol thanks... I'll try not to kill them next time.
You might want to attack that uni-brow too XD lol
-
i broke mine 3x!!!!thats sucks!!
-
>_> how do you guys break em soooooo easily
should I make a vid of me ripping them out and still having the work perfectly?
ok I dont really rip emm out, but I just pull it out slowly
-
idk I guess it's cause I pry under them with a screwdriver, which for one is sharp, and also I'm not doing it particularly carefully. Next time, i'll peel them up, and not pry them off.
-
The datasheets for these connectors strongly advise against the use of tools such as tweeers to open the clips - So use your fingers.
To be honest, I don't understand how you can break the connectors either? Unless you have a spasm halfway through lifting up/rotating the clip
-
idk it's not even the clip, It's when I peel it off the psp. I've taken them in and out of connectors loads of times without breaking them. It's when I decided to peel the triggers off the psp that I run into problems...
-
does it rip?
-
It doesn't look like it.