Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => Topic started by: thearkman2009 on April 06, 2009, 12:11:14 PM
-
I HAVE read through all the LM386 related threads, and found ONE person who asked this question, but it was never answered. between the board and the LM386, there are two resistors, 191k and 30k.
I am going to be using (for now), 3x 10k resistors for the 30k, and now the question.
Can I use 2x 100k resistors for the 191k? (9k is not much, but will it still work?)
-
Yes this will work depending what part of the circuit the resistor is used for it might lower the gain level in the amp so yeah it should work :tup: