Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PS3 => Topic started by: Death2All on April 08, 2009, 09:45:25 PM
-
Does anyone know if a dualshock's inards will easily fit in a non-dualshock's housing and if so any problems this may cause
I have a gost housing that I want to use for my controler mod, but it's from a normal sixaxis not a dualshock. If possibal I want to mod out my dualshock and put it in the gost housing, if it will fit.
It's my main controler and I thought it would look cool with some LEDs in the handels of the controler. Has anyone tryed this yet?
Any input is much appreciated
Thanks
Death2All
-
i think people have done case swaps on their ds3 to have that see-through look on the sixaxis.
haven't done it myself, but i think the older ds3 (non v2) controllers are swappable with the 6axis.
-
Thanks for the input
I got tired of waiting and got started already
Although it looks like I'm going to have to glue the rumble motors into the case
I'm planing on useing hot glue but not shutre is that will be strong enough
Any thoughts
-
Hot glue should be strong enough. I doubt the motors are strong enough to shake free of hot glue.
-
Awsome I'm in the middle of it now
Just waiting to get some led in the mail and I'll be putting it back together.
I'll let ya know how it goes, thank for the help