Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: bustinthejustin on April 12, 2009, 09:43:42 PM
-
OMG this sucks. I was doing the 2n2222 mod, when i accidentally overheated the pad and it came right off >.< They now seem to be dead. Anything I can do to fix it? I'm so mad, because I SUCK at soldering, and it's taken me hours to do a 2n2222 mod. I'm gonna buy a new tip next week, along with some flux. =\
-
you can try soldering to the trace to the pad, but you need to be careful
-
god, you have aweful luck with this psp
-
I am not familiar with the internals of the slim, but try tracing that wire back, if it comes to a resistor or something solder to that. If not find the trace, scratch off a bit of green insulation, till you are at the copper and solder.
And lastly, BE CAREFULL take your time when you are modding.
-
Okay nevermind I lifted both pads >.< anyway, there appears to be these metal stud type things where the pad used to be, so I just blobbed solder onto it and it seems to work. Oh well. I gave up on the led mod after something shorted or something and the led started burning.
Good advice though, Ghost... I just spent 5 hours on the damn thing and after about 4 hours i was starting to get really pissy. Gotta learn to mod in short sessions.
Thanks for the advice though, guys. If I ever finish the dang psp I'll show you guys.