Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: Ben. on April 13, 2009, 10:08:27 AM

Title: Rapid Fire Programming Help..
Post by: Ben. on April 13, 2009, 10:08:27 AM

Hello,

Right I want to be able to make my own rapid fire chips, for a sleeper rapid fire, I have the 'burnmeup2' hex and .asm. So What do i need now, What kind of chips/pics do I need and what is the best programmer, and anything else that would help me, as I am not to sure on any of this.. :/

Thanks  :tup:

Title: Re: Rapid Fire Programming Help..
Post by: Modded Matt on April 13, 2009, 11:41:29 AM

you were in the free code section. use the same tut, the only difference is the programing (which you have) and the wiring (which you should have) I will try to have burn me up wrote by the end of the week. I been on vacation and am playing catch up in my office.

go ahead and order chips, so when you get them in the tut will be done..you can get 4 free samples from microchip direct.com

Title: Re: Rapid Fire Programming Help..
Post by: Ben. on April 13, 2009, 12:22:07 PM

Ok cheers..  :tup: