Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Topic started by: maddawg on April 13, 2009, 08:26:21 PM

Title: question on modding.
Post by: maddawg on April 13, 2009, 08:26:21 PM
would it be possible to make the ring of light all red by swapping the green and red LEDs? idk.
Title: Re: question on modding.
Post by: thearkman2009 on April 13, 2009, 08:29:31 PM
As far as I know that should work.  I have a picture of the LEDs from the ring somwhere, I will try to dig them up for you.
Title: Re: question on modding.
Post by: Max_Kreeger on April 13, 2009, 11:42:00 PM
Yes its possible, you will need 0603 SMT LED's and the forward voltage has to be less than 3.0v because that's all the controller has to play with. Getting any red LED's will be fine, but just in case you get blue ones they are usually over 3.0v, but there are some under it. (I got a blue ring of light on my controller)

You can get the red LEDs from this guy/chick:

http://cgi.ebay.com/50-PCS-0603-SMT-SMD-450-mcd-RED-LED-Free-Ship_W0QQitemZ220278241159QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item220278241159&_trksid=p3911.c0.m14&_trkparms=72%3A1205 (http://cgi.ebay.com/50-PCS-0603-SMT-SMD-450-mcd-RED-LED-Free-Ship_W0QQitemZ220278241159QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item220278241159&_trksid=p3911.c0.m14&_trkparms=72%3A1205)|66%3A2|65%3A12|39%3A1|240%3A1318|301%3A1|293%3A1|294%3A50

I got my blue LED's from him/her and they work perfectly, and all the red ones are under 3.0v so your all set to go. Good luck. Hope to see pictures.

Max
Title: Re: question on modding.
Post by: 802Chives on April 14, 2009, 06:05:49 AM
cant you just reverse the LEDs for the ROL in order to make it RED?  Not sure but we all know that those green ROL LEDs are capable of turning red :laughing:

since they are 0603 that means there are only two leads, so if you send current one way you get GREEN and if you reverse the current you would get RED. IDK dont ever remember seeing anyone do it, but seems like a very straight forward mod if you are able to successfully remove the LEDs and reverse there direction.

If you do this and it works, just watch out for the GRoD! :taunt:
Title: Re: question on modding.
Post by: Max_Kreeger on April 16, 2009, 07:55:57 AM
Wait is this for a controller ROL or the xbox ROL...I thought controller, don't know why...
Title: Re: question on modding.
Post by: Blazinkaos on April 16, 2009, 11:21:50 AM
reverse them idk it could possible work saves you tome from getting 0603s but then again if you want red and some other color besides green
Title: Re: question on modding.
Post by: 802Chives on April 16, 2009, 06:27:38 PM
talking about the xbox ROL 
Title: Re: question on modding.
Post by: FreeK on April 16, 2009, 06:38:14 PM
If you do this and it works, just watch out for the GRoD! :taunt:

what happens when you have to send it to microsoft. they turn it on and the rod is green. theyll be going "WWWWTTTTFFFF?!?!?!?"
alll them be loling at you having to pay for the repairs
Title: Re: question on modding.
Post by: Blazinkaos on April 16, 2009, 08:38:46 PM
lol that would be funny to see..
Title: Re: question on modding.
Post by: treemty on April 17, 2009, 04:22:57 AM
if you want to switch them, you will have to cut 2 of the leads to the led(red and green) then solder them backwards in the way you would nomarally have them, it would be easier to just solder NEW leds
Title: Re: question on modding.
Post by: 802Chives on April 17, 2009, 07:19:49 AM
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fdiy.sickmods.net%2Fimages%2Frol.jpg&hash=ea464af59bee6c6b9521e170ab818ec5cd098f6e)

looks like there are 3 leads on the 4 Outside LEDs on the ROL board.  so you cant just flip em, like treemty said you have to cut and jump to do what I was talking about.
Title: Re: question on modding.
Post by: Ben. on April 17, 2009, 08:07:17 AM
Is there a diagram like that but for the controller Rol..?

Thanks
Title: Re: question on modding.
Post by: Blazinkaos on April 17, 2009, 09:49:56 AM
if you want to switch them, you will have to cut 2 of the leads to the led(red and green) then solder them backwards in the way you would nomarally have them, it would be easier to just solder NEW leds
yea i can see now ur right
SimplePortal 2.3.5 © 2008-2012, SimplePortal