Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => Topic started by: jakxxx on April 27, 2009, 09:16:05 AM
-
While I was doing my SR mod I decided I was going to need a "breakout" board. Something I could use to connect all of my wires to. Like Arioch did with the venrobaord. I found an old isa type card for a printer I had in my garage and cut the connector end off. I tinned all of the connectors and used it as my base for all of the wires. A pci card would be better as the connectors are alot smaller and closer. Tell me what you think. Also the board I had has separate connectors on each side (meaning the connectors opposite each other are not connected.
-
Nice idea, you could also use perfboard or strip board from radioshack.
-
Pics?