Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: ryan0 on April 28, 2009, 11:38:26 AM

Title: Scaled razor template here =====>
Post by: ryan0 on April 28, 2009, 11:38:26 AM: I seen some of the templates posted on these forum,and they are not the right size,if you use them then the spring will not centre because the lid rub on the solder!So here is a template the I scaled perfectly!This is what I used for my razor mods:

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi40.tinypic.com%2F9lk8lf.jpg&hash=9add58688167c3346d1a55d00956ce197e9f30df)

Thought it will be useful =]
Title: Re: Scaled razor template here =====>
Post by: GhoSt on April 28, 2009, 12:00:45 PM: nice find.
But this infomation has already been posted.

https://www.acidmods.com/forum/index.php?topic=23707.0 (https://www.acidmods.com/forum/index.php?topic=23707.0)
Title: Re: Scaled razor template here =====>
Post by: ryan0 on April 28, 2009, 01:49:15 PM: Quote from: GhoSt_Death on April 28, 2009, 12:00:45 PM
nice find.
But this infomation has already been posted.

https://www.acidmods.com/forum/index.php?topic=23707.0 (https://www.acidmods.com/forum/index.php?topic=23707.0)

In that template,the razor is a little bit too big,so when you make it and solder the pads,the cap will not fit in top,that is why I post my one that is slightly smaller =]