Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: bustinthejustin on May 17, 2009, 03:14:56 PM

Title: How to remove controller sync button?
Post by: bustinthejustin on May 17, 2009, 03:14:56 PM

Anybody got a tutorial for removing and then putting back the sync button on the controller?

Title: Re: How to remove controller sync button?
Post by: Ghost In Black on May 17, 2009, 06:41:59 PM

No but there's probably the solder points somewhere... maybe. Just curious, why would you want to do that anyways?

Title: Re: How to remove controller sync button?
Post by: 40_ounce on May 17, 2009, 06:43:18 PM

I havent seen one. Looking at the sync button it looks difficult. Why would you want to remove and replace? If you don't mind me asking........

Title: Re: How to remove controller sync button?
Post by: bustinthejustin on May 17, 2009, 08:09:33 PM

Quote from: Ghost In Black on May 17, 2009, 06:41:59 PM

No but there's probably the solder points somewhere... maybe. Just curious, why would you want to do that anyways?

I don't mean the ACTUAL sync button. I mean the little thing that presses it. Like the thing in the trim at the top. I wanna remove it so that when I paint my controller, it doesn't stick and get screwed up.

Title: Re: How to remove controller sync button?
Post by: Modded Matt on May 18, 2009, 05:12:17 AM

I think if you do get that off, it wont go back on?? I painted one hot pink for my wife this weekend, no problems with it sticking, everything worked out fine.

Title: Re: How to remove controller sync button?
Post by: Ghost In Black on May 18, 2009, 12:40:16 PM

Yeah I've painted about 5 controllers and you don't need to remove that. You'd have to glue it back on if you did happen to take it off.

Title: Re: How to remove controller sync button?
Post by: bustinthejustin on May 18, 2009, 01:13:58 PM

Alright thanks guys =D

Just wanted to make sure. So no paint got between the button and screwed it up? That's good to hear.

Title: Re: How to remove controller sync button?
Post by: Modded Matt on May 19, 2009, 09:39:04 AM

just paint away. I did not have any problems, I checked it for you last night and it was fine.

Title: Re: How to remove controller sync button?
Post by: bustinthejustin on May 19, 2009, 09:21:03 PM

Thanks again :)

Title: Re: How to remove controller sync button?
Post by: xboxlax on August 09, 2009, 09:02:51 PM

If you don't want to paint it, what you want to do is push the button out. And while it's pushed back tape a piece of painters tape and cover it up, then let go of the button.

Let me know if you need any more help, or have any questions.

~Ant

Title: Re: How to remove controller sync button?
Post by: Blazinkaos on August 09, 2009, 10:11:49 PM

I poped my out but had to but some super glue to hold it down some.

Title: Re: How to remove controller sync button?
Post by: Modded Matt on August 10, 2009, 04:37:16 AM

xboxlax, yes, if you dont want to paint just the small button, push it in and tape it from the inside of the bumper assembly, I dont suggest breaking it off, just push it in, wedge a tooth pick in there to hold it in during painting