Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Topic started by: Ben. on May 19, 2009, 09:58:06 AM

Title: I Just Got Error E73 :( - Anyone Know How To Fix..?
Post by: Ben. on May 19, 2009, 09:58:06 AM

Alright guys, I just got error e73 on my 360, i have tried all the stuff Microsoft said and that, but still no luck.

Anyone know a fix..?

Does X-Clamp work..?

Thanks - any help would be appreciated.. :)

Title: Re: I Just Got Error E73 :( - Anyone Know How To Fix..?
Post by: Modded Matt on May 19, 2009, 01:08:04 PM

the e7e error is now covered under the 3 year waranty. and this, unlike the RROD is "unrepairable" according to a microsoft press release. MS states that it is worse than the RROD!!!

if it is not opened, send it to microsoft, if the waranty is void, you can try the xclamp. but it wont last and may not even work.

sorry about your luck.

Title: Re: I Just Got Error E73 :( - Anyone Know How To Fix..?
Post by: Ben. on May 19, 2009, 01:18:22 PM

Ok.. my 360 is sealed, i got it not last xmas the one before, but the guy from MS on the phone said it would cost £68 to fix..? Are you sure its covered..?

Thanks

Title: Re: I Just Got Error E73 :( - Anyone Know How To Fix..?
Post by: Modded Matt on May 19, 2009, 01:52:22 PM

I am sorry dude. I was wrong I did a search to look back, its the E74 that is now covered.

you have E73 which is
E73: General Hardware Error: Ethernet port... this error is caused by a problem with the Ethernet port.


I dont know anything about it, but the xclamp wont help.

Title: Re: I Just Got Error E73 :( - Anyone Know How To Fix..?
Post by: Ben. on May 19, 2009, 11:16:23 PM

Thanks Anyway, I Don't Even Use My Ethernet Port..  :cry2:

Cheerrrrsss

Title: Re: I Just Got Error E73 :( - Anyone Know How To Fix..?
Post by: 802Chives on May 20, 2009, 07:03:39 AM

I did a little looking around for you, and saw that the only people that were able to fix it, either used a heat gun around the ethernet port area to try to reflow the solder joints, or were able to see some serious warping of the motherboard in that region and alievieated it with spacers against the frame.

Either way £68 is too much for a repair, better off selling it as is, cuz you never know what kind of junk M$ will send as a replacement.

I wouldnt recomemnd opening it, as this is one of those things that may or may not be able to be fixed, so unless you are well skilled at 360 repairs probably would be best to cut your losses while you can.

Title: Re: I Just Got Error E73 :( - Anyone Know How To Fix..?
Post by: Ben. on May 20, 2009, 11:21:07 PM

I may attempt an repair, my dads a vehicle electrician, so he knows what he is looking at. :L

But yer.. it would probably be worth selling it, then buying a semi-new one.. :/

Cheeerrs :tup: