Acidmods

AcidMods Resources ----- ( These are helpful tools for modding ) => Electronics Projects => Topic started by: blackwid1 on May 19, 2009, 07:12:45 PM

Title: Wiring Sound reactive led's
Post by: blackwid1 on May 19, 2009, 07:12:45 PM

Ok so i'm about to wire up my led's I have a resistor and what I was going to do was wire the resistor to the positive or the negative of the speaker and then to the led's. I was wondering if this would work and if so whether I should solder the resistor to the positive or the negative.  Thank you

Title: Re: Wiring Sound reactive led's
Post by: hamchapman on July 05, 2009, 02:59:44 PM

For PSP slim: https://www.acidmods.com/forum/index.php?topic=13492.0 (https://www.acidmods.com/forum/index.php?topic=13492.0)

For PSP phat: https://www.acidmods.com/forum/index.php?topic=27396.0 (https://www.acidmods.com/forum/index.php?topic=27396.0)

They may not be the exact mods that you're doing but they give you the general info needed for where to wire things up and how to do it all.

Hope this helps.

Title: Re: Wiring Sound reactive led's
Post by: Jumbo on July 05, 2009, 06:54:35 PM

Resistors go on the positive side. :D