Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Topic started by: PspKicks316 on May 24, 2009, 05:16:53 PM
-
I'd need this answered, first.
What kind of form factor is the 360 motherboard, if any? Is there a way I could take motherboard tray from a PC and mod it to fit a 360 motherboard?
-
All most any MicroATX, MiniATX Formfactor MBs should Fit. If your planing on making your old 360 in to a PC Do it. Cause that is what Im gonna be doing. Adding the Drive wont be hard if you use a MicroATX or MiniATX, You can also get a laptop HDD and Keep in in the Old 360 HDD case. lol
-
Nah I was going to put my 360 into a PC case. Hence why I wanted to know if it would be easy to mod a MB tray to fit a 360 MB haha.
-
Well if I were doing this mod, it would be easy since I do way more advanced metal work than all yall
-
Well if I were doing this mod, it would be easy since I do way more advanced metal work than all yall
How about answering my question instead of being an :censored: and trying to show off?
-
Well first of all I'm not trying to show off since it is my area of expertise and career field. To now answer your question, it should be easy enough for you to do it a case will not fit the MB holes. All you would need to do is get a drill, drill the holes where you want them and tap the holes so you can screw in the little gold MB holders.
-
Care to explain what that means to someone who's never done that before?
-
Care to explain what that means to someone who's never done that before?
get a drill and line up the xbox mobo and drill the holes you need. or you can mark the holes first then drill
-
yes, just drill the holes to match the 360 holes. When I say tap the holes I mean to use a tool called a tap which threads a hole so a screw can be screwed into it. Then you can screw the little gold MB holder thingys (dont know the exact name for em) into the newly drilled holes and then put the board up there and then screw it down
-
But won't it drill through the case... like through to the outside? Maybe I'm missing something here.
-
But won't it drill through the case... like through to the outside? Maybe I'm missing something here.
the inner metal cage, thats what they are talking about
-
Ohhhh. I'll have to check that out, then.
-
most computer cases have a motherboard tray that is about 1/2 or so away from the actual case side, some even have removable ones. If you could get your hands on one of those that would probably be ideal
-
Alright. I'll probably go for this once I get money, then. Maybe build an ultimate rig with all of my systems in it xD
Nah.