Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: EliteGamer83 on May 29, 2009, 05:04:04 PM

Title: How to transfer those metal female threaded holes to a new case??
Post by: EliteGamer83 on May 29, 2009, 05:04:04 PM

You know those threaded holes on the top of the PSP? well I just found out that they are only in OEM cases and not in the ones you buy online... well I need those for a mod but they are part of the old case, how can I transfer them to my new case?

Title: Re: How to transfer those metal female threaded holes to a new case??
Post by: RoBot1ks on May 29, 2009, 05:33:28 PM

I usually use a small screwdriver or a knife to pry them out of the plastic casing. They will come out. Threaten them

Title: Re: How to transfer those metal female threaded holes to a new case??
Post by: l0rdnic0 on May 29, 2009, 06:05:59 PM

You need to remove the white clip that holds the UMD door closed (don't loose the spring) After that's out, use a small screw driver to get them out. To get the spring back in place, use the same screwdriver to a line the spring with the post and the white clip.   :#1:

Title: Re: How to transfer those metal female threaded holes to a new case??
Post by: EliteGamer83 on May 29, 2009, 06:49:03 PM

Okay I got em' and I did have to threaten them.  :angry:  :rofl:

Thanks guys.

Locked?

Title: Re: How to transfer those metal female threaded holes to a new case??
Post by: MattZani on May 31, 2009, 11:57:39 AM

Just wanna say thanks, just read this, my Red Slims UMD Door doesnt stay closed, gotta open the f**ker all the way up now >.>

Title: Re: How to transfer those metal female threaded holes to a new case??
Post by: l0rdnic0 on June 01, 2009, 08:13:37 AM

I'll try and update the Case swaping TUT today and include some nice pictures.... The first time I did my case swap I forgt them too.... don't feel bad. :#1:

Title: Re: How to transfer those metal female threaded holes to a new case??
Post by: bustinthejustin on June 01, 2009, 02:26:14 PM

Wait... what threaded things? The things used to hold attachments? I thought they're built into the case.

Title: Re: How to transfer those metal female threaded holes to a new case??
Post by: l0rdnic0 on June 01, 2009, 09:49:26 PM

nope their not!!