Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: alentris on June 04, 2009, 03:07:49 PM

Title: Dual Nub
Post by: alentris on June 04, 2009, 03:07:49 PM: I have a question on the dual nub. Do I have to use a phat nub?? because the phat doesn't have a silver nub as far as I know, and I want it to match the existing. Or, does the top part for the slim fit onto the phat nub??
Title: Re: Dual Nub
Post by: Blazinkaos on June 04, 2009, 09:58:16 PM: I believe it should i never tested both of them on each other. Have to tested it just to see.
Title: Re: Dual Nub
Post by: alentris on June 05, 2009, 03:04:55 PM: Quote from: Blazinkaos on June 04, 2009, 09:58:16 PM
I believe it should i never tested both of them on each other. Have to tested it just to see.
Are you saying about the color of the nub? or using an actual slim nub for the razor x...
Title: Re: Dual Nub
Post by: GhoSt on June 05, 2009, 04:20:53 PM: I have never disasembled a slim nub, but I no for a fact the razor and a2d were designed for the phat nub, and the chances that the slim nub has a spring and casing that will fit exactly onto the board are minimal. Isn't it posible to just clip the nubby top bit of your colour onto a phat analog?
Title: Re: Dual Nub
Post by: maelo0525 on June 05, 2009, 04:39:11 PM: yes tested it and they do fit
Title: Re: Dual Nub
Post by: alentris on June 05, 2009, 06:43:18 PM: Quote from: maelo0525 on June 05, 2009, 04:39:11 PM
yes tested it and they do fit
good, because there is no silver phat nub :D thanks for the input.
Title: Re: Dual Nub
Post by: GhoSt on June 05, 2009, 09:48:45 PM: its not about fitting it, Its about it being compatable with a razor.
Title: Re: Dual Nub
Post by: EliteGamer83 on June 06, 2009, 06:27:04 AM: Wait, what is the point of disassembling the powerboard? It looks to me as if it has nothing to do with the razor...
Title: Re: Dual Nub
Post by: alentris on June 06, 2009, 06:29:50 AM: Quote from: EliteGamer83 on June 06, 2009, 06:27:04 AM
Wait, what is the point of disassembling the powerboard?
where did that come from??

:faint: What I basically want to know:

1. Is it possible to use a slim analog stick with the razor x
2. Does the colored nub on the top of the slim analog stick fit onto the phat analog stick.
Title: Re: Dual Nub
Post by: EliteGamer83 on June 06, 2009, 06:36:15 AM: Quote from: alentris on June 06, 2009, 06:29:50 AM
where did that come from??

:faint: What I basically want to know:

1. Is it possible to use a slim analog stick with the razor x
2. Does the colored nub on the top of the slim analog stick fit onto the phat analog stick.

Oh sorry, I thought this was my Dual Nub thread, my bad..

I don't think so, it was designed for a phat.
Title: Re: Dual Nub
Post by: bustinthejustin on June 06, 2009, 12:11:09 PM: No the razorX won't fit a slim analog, and I'm pretty sure you have to mod a slim nub top to fit it on a phat nub.
Title: Re: Dual Nub
Post by: Blazinkaos on June 07, 2009, 09:05:17 PM: The only different is the top moves so thats an issue and it has the extra plastic or the pins sticking out of it.