Acidmods
Acid Mods Community Area
=> Discussion Boards => General Discussion => Topic started by: Blackie1909 on June 15, 2009, 09:37:24 AM
-
here is the Pic
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg87.imageshack.us%2Fimg87%2F8099%2F56560191.jpg&hash=a2675f7a323963a2276e08e5ad29643a5336781a)
Anyone can tell me please the name of it's official selling name?
Thanks in advance
-
I don't think it has an official name, it's just the backlight ribbon connector.
-
i tryed looking for one with no luck, but its a zif conector for the backlight.
-
ok so i know for what i have to look for
thx for answers
-
It's an fpc connector...
-
thats what it is, ive been looking for one and thought it was a zif, thanks kicks. it might be easier to find know.
here you go
http://www.vgcrepairs.biz/zen_store/index.php?main_page=product_info&cPath=0&products_id=118&zenid=c7c23322d00456fceb5b17f2fbe90efa (http://www.vgcrepairs.biz/zen_store/index.php?main_page=product_info&cPath=0&products_id=118&zenid=c7c23322d00456fceb5b17f2fbe90efa)
this should help.
-
i don't know how to thank you i can only say thank you million times
this is for your answers :#1:
-
Kicks gets a cookie :tup: Flexible Printed Circuit connector (FPC) or sometimes they are refered to as FFC or Flat Flexible Cable connectors. I get em from Hirose mostly but there are others that make em like Molex. FPC/FFC connectors are what Hirose calls em
-
wait... then why do everyone just call them ZIF connectors?
-
Zero Insertion Force, a way to connect an electrical connector without applying force to the connector. that what i thought it was but couldnt find anything till kicks corrected me. man i feel dumb
-
I hear a lot of people refer to Zif sockets incorrectly like a name brand or a specific connector. Like injungleist said it stands for Zero Insertion Force, and technically it could cover an wide variety of connectors including a FFC/FPC connector.
In this case it would be a Zif FPC connector. One that many people are familiar with are dip zif sockets. they are the green ones with a little lever that can handle dip chips that you find on some programmers.
Zif is like a descriptor the same way a "keyed" connector or a "locking" connector would be used, but be careful as it is terminology that may or may not be used by the manufacturer to describe that kind of connector. there are low insertion force connectors as well.
-
http://www.psxboy.com/326_LCD-Backlight-Cable-Slot.html (http://www.psxboy.com/326_LCD-Backlight-Cable-Slot.html)
Here you go!