Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Topic started by: ohyeah on June 22, 2009, 12:14:35 PM

Title: rrod
Post by: ohyeah on June 22, 2009, 12:14:35 PM

i did the penny methed and the x-clamp mothed like 4 time on my 360. when i turn it on it turn to 2 rrod with error code 0012. how do i fix this?

Title: Re: rrod
Post by: buickgnx on June 22, 2009, 12:28:46 PM

0012 GPU over heating -ensure your x-clamps are installed properly heres my threde on it https://www.acidmods.com/forum/index.php?topic=21654.0 (https://www.acidmods.com/forum/index.php?topic=21654.0)

Title: Re: rrod
Post by: ohyeah on June 22, 2009, 12:36:36 PM

how would i do that i did the x-clamp like 4 time already and it is comming up withe the same error code

Title: Re: rrod
Post by: buickgnx on June 22, 2009, 12:54:33 PM

idk
it keeps messing up
look at you board to the heat sink, what is the order?

Title: Re: rrod
Post by: Modded Matt on June 23, 2009, 04:06:05 AM

use the thermal paste

Title: Re: rrod
Post by: dice888 on June 23, 2009, 04:17:31 PM

I dont know if this helps but the first xbox I fixed did the same thing and it was because the the top washers were too thick and the heat sink didnt touch the cpu and gpu. I took the metal washer off and I just left the nylon washer on and that way i was able to correctly put preasure between the processors and the heatsink. let me know if this helps at all