Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Topic started by: MARIOPARTY53 on June 22, 2009, 10:46:21 PM

Title: How do I flash a xbox hitachi drive? (NOT FOR RIPING GAMES)
Post by: MARIOPARTY53 on June 22, 2009, 10:46:21 PM

Ok, I got this hitachi drive out of another xbox. I need to know how to flash so I can play my games on it that I bought as it wont (becuase its needs to be flashed)
any help on this. I would prefer to not buy and chips but If its needed then I can

thanks  :clap: :clap:

Title: Re: How do I flash a xbox hitachi drive? (NOT FOR RIPING GAMES)
Post by: krazyone2006 on June 24, 2009, 08:20:35 PM

you need a VIA 6427 I/O controller (PCI SATA card) or compatable SATA jacks on your PC's motherboard, jungle flasher, and Iextremem 1.6 just got www.360mods.com (http://) and they got tutorials on how to do it all thats how i learned to do it good luck with it be careful you don't brick the drive

Title: Re: How do I flash a xbox hitachi drive? (NOT FOR RIPING GAMES)
Post by: Jumbo on June 27, 2009, 08:01:12 PM

Be careful Hitachi is the one and only brickable DVD drive in 360's.

Also there is no 1.6 Ixtreme for Hitachi yet, you need to use 1.51. It does the same thing but you cant rip games off the drive and a couple other small things..