Acidmods

AcidMods Resources ----- ( These are helpful tools for modding ) => Pic Programmers and Programs => Topic started by: zapped69 on July 03, 2009, 11:54:17 AM

Title: Hazers open source code
Post by: zapped69 on July 03, 2009, 11:54:17 AM

Just starting to modifiy Hazers open source code when I found out that there was a patch. 

Is there anyway to modifiy the firerates to make the open source code work?

If so what should the fire rates be and does firerate1 link to mode 1, firerate2 to mode 2, etc...

Thanks.

Title: Re: Hazers open source code
Post by: BIMPtacular on July 03, 2009, 02:24:25 PM

0x42 is the fastest working firing rate......i think that is 7.57 sps

Title: Re: Hazers open source code
Post by: Jumbo on July 08, 2009, 05:19:15 PM

Firerate 1 = mode1 yeah tahts how it works

Also i think the cap is under 7.5 shots...

Title: Re: Hazers open source code
Post by: tomcat on July 11, 2009, 07:13:55 AM

on my code i set the fire rate to 7.81 0r 7.89 but w/e I have never gotten blocked.

Title: Re: Hazers open source code
Post by: skittles916 on October 08, 2009, 08:54:20 PM

where/how are you getting this .hex /open source codes to use/modify. im an amateur modder. ive botten chips and i now would like to program my own chip. i own a usb programmer but havent had luck finding a code that would work for sleeper modes and such. where are the Hazer codes? 

Title: Re: Hazers open source code
Post by: Modded Matt on October 09, 2009, 11:52:10 AM

https://acidmods.com/forum/index.php?topic=29999.0 (https://acidmods.com/forum/index.php?topic=29999.0)