Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => Topic started by: JoaoPais on July 21, 2009, 12:32:28 PM

Title: Wifi Switch broken
Post by: JoaoPais on July 21, 2009, 12:32:28 PM

Hey. I was assemblying my phat PSP. I've slided the wifi switch and it seem loose. When I slided it again, it has broken. And thge switch stays off.
How can I put it on again?

Title: Re: Wifi Switch broken
Post by: injungleist on July 21, 2009, 01:52:08 PM

there is a way to bypass the switch. if you flip over the mobo. the top two pins from the switch can be connected and you will have your wifi back.

Title: Re: Wifi Switch broken
Post by: JoaoPais on July 30, 2009, 07:54:26 AM

so i solder the two pins together?

Title: Re: Wifi Switch broken
Post by: injungleist on July 30, 2009, 08:30:19 AM

yes, there are 3 pins, the top ones you put togather with a small wire or bridge it with solider. and as always test before you put all back togather.
you can always see if the switch is coming off the board and solider it back on.

Title: Re: Wifi Switch broken
Post by: JoaoPais on July 31, 2009, 09:28:53 AM

Ok. Thanks, but the switch has broken. I will do the bridge.
Thanks,

JoaoPais