Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: milotisx on July 25, 2009, 05:10:34 PM

Title: Analog Pad on mobo ... Help?
Post by: milotisx on July 25, 2009, 05:10:34 PM

SO, I have lost the rubber padd that goes underneath my analog stick... which sucks big time. Basically I want to know if its as simple as it seems to solder each one of the connectors to the analog nub component. I hope eI'm explaining this right...

tl;dr - Can i solder analog nub straight to motherboard

ALSO Is it possible to solder a ps2 joystick directly onto the mpotherboard?

Thanks!

 :help:

Title: Re: Analog Pad on mobo ... Help?
Post by: injungleist on July 25, 2009, 05:21:35 PM

yes you can solider it stright to it, but the faceplate has to be put on carefully so the analog sticks out right, and doesnt break your joints.

Title: Re: Analog Pad on mobo ... Help?
Post by: milotisx on July 25, 2009, 08:22:40 PM

Thanks man! Sounds good! I just need the four contacts right? I;m psyched to try it... I have no analog nub for that side its very broken.
 :tup: