Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: KB24 on August 01, 2009, 04:49:02 PM

Title: How do I use this programmer?
Post by: KB24 on August 01, 2009, 04:49:02 PM

I bought this programmer and installed the software that they said to install. But. . . it isn't working! :cry2:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310157647050&ssPageName=STRK:MEWNX:IT (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310157647050&ssPageName=STRK:MEWNX:IT)

Title: Re: How do I use this programmer?
Post by: Jumbo on August 01, 2009, 05:56:49 PM

Did you install the drivers and whats your OS?

Title: Re: How do I use this programmer?
Post by: KB24 on August 01, 2009, 08:32:47 PM

Yes I installed the drivers. But what is the OS

Title: Re: How do I use this programmer?
Post by: 40_ounce on August 01, 2009, 11:21:00 PM

What is the Operating System "OS" of the computer you're using

Title: Re: How do I use this programmer?
Post by: Modded Matt on August 02, 2009, 06:22:05 AM

vista creates problems with older hardware?? uninstall,reinstall software??

Title: Re: How do I use this programmer?
Post by: Jumbo on August 02, 2009, 08:19:57 AM

If you have vista, the drivers they supplied are outdated, use these-
http://rapidshare.com/files/262891861/vista-prolific-chip-driver-for-serial-adapters.zip.html (http://rapidshare.com/files/262891861/vista-prolific-chip-driver-for-serial-adapters.zip.html)

Title: Re: How do I use this programmer?
Post by: gameroms on August 02, 2009, 09:23:10 AM

works well on vista with stock files here after you figure out to setup the com port, under file in top left.

Title: Re: How do I use this programmer?
Post by: Jumbo on August 02, 2009, 07:17:45 PM

Oh yanow i remember why i used those files, the stock ones didnt work on Vista x86 so i used them and it worked. I got it off Prolifics site so im not sure if it was updated to support or what..

Title: Re: How do I use this programmer?
Post by: KB24 on August 02, 2009, 09:58:44 PM

Grrrr. . .  :angry: IT'S NOT WORKING! I'm not sure why it isn't. I've uninstalled and reinstalled it five times already. I spent about 2 hours trying numerous things.

Title: Re: How do I use this programmer?
Post by: Jumbo on August 02, 2009, 11:00:04 PM

What isnt working?