Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: Fetts on August 01, 2009, 06:02:09 PM
-
Anyone know how to do it? (Including Mic)
Link here: PSP SLIM - Internal Chotto Go Cam Mod (http://www.youtube.com/watch?v=s6a9MBc-VuA&feature=related#lq-lq2-hq) :#1:
-
:censored: :censored: :censored: :censored: :censored: :censored:
-
yes tut links here:
Internal go cam:
https://www.acidmods.com/forum/index.php?topic=13432.0 (https://www.acidmods.com/forum/index.php?topic=13432.0)
Disassembling go cam (need for internal one):
https://www.acidmods.com/forum/index.php?topic=10580.0 (https://www.acidmods.com/forum/index.php?topic=10580.0)
and cr-3100 internal photofast:
https://www.acidmods.com/forum/index.php?topic=24584.0 (https://www.acidmods.com/forum/index.php?topic=24584.0)
And the microphone? :beg:
-
:censored: :censored: :censored: :censored: :censored: :censored: :censored:
-
Microphone is one the go cam
so when you internalize it.
You'll have the mic.
(mic is in the top right corner attached to cam)
(https://www.acidmods.com/forum/gallery/2191_21_10_07_5_23_00.png)
Thx :clap:
But one last question! :beg: Do I have to remove my UMD drive and my USB port?
-
:censored: :censored: :censored: :censored:
-
you can put the cam in the back of the psp.
on the opposite side of the battery.
and keep the umd drive.
and to keep the usb port you gotta add a switch to Data+ (D+) if you wanna use usb mode.
Diagram:
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fwww.mp3car.com%2Fvbulletin%2Fimagehosting%2F14542749b2367952e11.jpg&hash=60208d86f373a8cb097336ab345f644c6fcaa10a)
Do I need to buy other materials apart from the Go! Cam? Also, can you make the picture more understandable (I'm new to PSP Hacking! :yess:)
-
:censored: :censored: :censored: :censored: :censored: :censored:
-
Lol It's not hacking it's modding.
but things you will need are:
15 watt soldering iron
30AWG wire
0.015" solder
Soldering paste, Flux (not needed but makes it so much easier and recommended).
all of this can be found at radio shack.
and a slide switch for the usb Data+
from mouser.com
A psp screwdiver (find a small Phillips head at home depot or somewhere)
I'll make a Diagram tomorrow.
But what did you not understand?
The diagram was ALL over the place!
Post Merge: August 02, 2009, 02:17:08 AM
I'll make a Diagram tomorrow.
Could you make a tutorial instead? :help: :cool:
-
:censored: :censored: :censored: :censored: :censored: :censored:
-
No I don't have a go cam. I'll try to make another diagram today.
and there's a tutorial on acidmods.
Yes, but in that one I loose my UMD Drive (I bought games before I hacked my PSP! :censored: THIS :censored:!!! LOL)
-
:censored: :censored: :censored: :censored: :censored: :censored: :censored:
-
so you get the wiring just not were to put the cam and keep umds?
Yes, thankyou! :clap:
Also, I don't also want to loose my USB connection.:(
-
thats what the switch is for
it disconects the cam from the usb so you can use usb normally
correct me if im wrong
-
:censored: :censored: :censored: :censored: :censored: :censored: :censored: :censored: :censored: :censored:
-
I'll make a Diagram tomorrow.
When is tomorrow? :rofl:
-
:censored: :censored: :censored: :censored: :censored: :censored: :censored: :censored: :censored:
-
This is a good place to put your Go!Cam....or Chotto Shot, whatever name you wanna call it.
-
lol sorry
on the usb to camera add a switch to the middle pin (the third one and the yellow wire in This Picture. (http://www.mp3car.com/vbulletin/imagehosting/14542749b2367952e11.jpg))
and make the wires long enough so you can fit the cam on the case on the opposite side of the battery like in the video.
I am new to hacking and 13 years old, so, could you please provide a picture so I can understand?
-
i'll make a tut this stuff seems pretty straight forward ...
W-Gaming5 if you could help me find a good size switch that can fit i'll try this on my psp and make a tut
-
can I have a tutorial or is acidmods down for you?
-
FFS... all the info is here. Do some searching. Like everyone else has said, it's pretty straight forward. Use common-sense. And honestly "I'm 13" is not an excuse for being lazy. Just do some searching... Do you even know how to solder?
-
I'm starting IT next year, so no I do not know how to solder, is that a problem?
-
You're not going to be able to do this, then. There's a lot of intricate soldering you'll need to do, and clearly you don't understand how.
These diagrams do NOT get any simpler than how they are. If you can't understand the simple wiring, don't try this.