Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: nico on August 01, 2009, 07:25:29 PM
-
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi6.photobucket.com%2Falbums%2Fy236%2FredALB%2Fpspmod.jpg&hash=d1e9876cd60fdd90be7f4442ffc4e1eebfec2742)
trying to have push to light trigger and sound reactive 8leds with switch(s)
edit the pic if u have to :beg:
-
Its a bit messy but i know someone thats good at diagramming and will help you out with that.
But looking at this seems you got everything one on constant line witch isnt right from what i know. They have to be separate with there own wires but with a switch to switch from one another.
-
But looking at this seems you got everything one on constant line witch isnt right from what i know. They have to be separate with there own wires but with a switch to switch from one another.
so one led= one connection to speaker?another led=another connection to same speaker
not like what i did which is 4 leds = one connection to speaker + switch?
i got this idea from this thread= https://www.acidmods.com/forum/index.php?topic=31513.0 (https://www.acidmods.com/forum/index.php?topic=31513.0)
can u edit so i can understand better?
-
:censored: :censored: :censored: :censored: :censored:
-
MM i dont know i think the LM386 will play a good roll in this i already PM the guy that would figure something out for this so once he receives im sure he will post something but thanks for trying w-gaming. But i have an idea but ill map something out tomorrow and see. W-gaming you remember the diagram for that slim i did i may be close to that but without the solid. Replace the solid part of it with the push reactive. Maybe!
-
so this is good?
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi30.tinypic.com%2F2zfud8k.jpg&hash=4832beaae244cbd20e706ee7b2efda817906a29e)
but for the umd jewel I've seen people have a line and have it work fine like in the diagram (They did lm386 but it should still work).
well if this work then ty very much.... btw i was wondering if resistors are needed for the green leds?
-
Thanks for the refferral blazin. Lol
from what I understand, you want to put a momentary push style switch under each trigger to make them push reactive rigt?
If that's the case, this original diagram isn't far off. He already has the LEDs in parallel. Only thing is, the way the diagram currently is, pushing one trigger will light them both up while pushing the other will light the umd door. Also the lights will only be on while the buttons are being pushed.
OP: Let me know if I got it wron. Or missed anything. Once I know what exactly is wanted, I'll go ahead and draw you up a diagram.
-
:censored: :censored: :censored: :censored: :censored: :censored: :censored: :censored: :censored: :censored: :censored:
-
most people don't use resistors for green.
so you don't need them
thnx
-
Thanks for the refferral blazin. Lol
from what I understand, you want to put a momentary push style switch under each trigger to make them push reactive rigt?
If that's the case, this original diagram isn't far off. He already has the LEDs in parallel. Only thing is, the way the diagram currently is, pushing one trigger will light them both up while pushing the other will light the umd door. Also the lights will only be on while the buttons are being pushed.
OP: Let me know if I got it wron. Or missed anything. Once I know what exactly is wanted, I'll go ahead and draw you up a diagram.
Lol I knew you were the man for the job rceckspurt13.