Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => Topic started by: mastapsp on August 08, 2009, 12:24:15 PM
-
Modded PSP, Dual SD reader, color changing LED's, 4 Dip switches, 18 custom LED's (http://www.youtube.com/watch?v=TU5_U6iTctU#lq-lq2-hq-vhq)
I let this one go cheap, $320
-
That PSP is so sexy. Good job man.
-
how about some pics along with the vid ///
-
did you use a transistor to change the led colours from red-blue-green-red??
-
Used them for the blue and green LED's but not for the color changing LED's
There are 2 in the umd door they are 3mm RGB color fading LED's
they change color on their own there is not enough power to do them on the transistors
-
Nice thats sick psp man good job.
-
so they fade on thier own? i understand that rgb leds have 4 pins (ground, r+, b+, g+) but i always thought you needed to connect to a fader board via a switching transistors (more colours, more trans). im probably wrong anyway could you post a wire up of how your leds change colour?
oh and i forgot before.. sweet mod man :tup:
-
sick...
-
so they fade on thier own? i understand that rgb leds have 4 pins (ground, r+, b+, g+) but i always thought you needed to connect to a fader board via a switching transistors (more colours, more trans). im probably wrong anyway could you post a wire up of how your leds change colour?
oh and i forgot before.. sweet mod man :tup:
thats multi color LED's for like power lights,
these are just 2 pins they fade on their own without suppling power to different pins, they all fade in the same order just at fractions off a speed difference so finding 2 that match can be important or not. the speakers can only supply a max of 3.5 volts with a transistor I believe and these LED's are good with at least 4-5v, otherwise only red and green will work, mainly red
hey are hard to find
here is a link:
http://cgi.ebay.com/10x-3mm-RGB-Slow-Color-Change-LED-Free-Resistors_W0QQitemZ290339797892QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item439999bb84&_trksid=p3286.c0.m14 (http://cgi.ebay.com/10x-3mm-RGB-Slow-Color-Change-LED-Free-Resistors_W0QQitemZ290339797892QQcmdZViewItemQQptZLH_DefaultDomain_0?hash=item439999bb84&_trksid=p3286.c0.m14)
-
How are the DIP switches wired? I want to put some switches in mine.
-
I believe used them on positive points for each sections of the leds. Almost like when people use the hold switch to turn on there its simply like that.