Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: xboxlax on August 08, 2009, 11:52:46 PM
-
I want to put the LEDs of the XYBA buttons on a switch, so that when the switch is "flipped" the lights go on.
How can I do this?
-
wire the lights and break ground with the switch
-
i thought of doing this with a pic chip and a tactile button on the back
have the pic programmed to act as a on off switch with the push of the tactile and you could also program different flashing mode's into it. or something like that.
only thing is im not a coder so cant right the code for it myself
if any1 can that'll be cool
have so it can run like 5 seterate led's or 5 sets of leds, and a tactile push button for mode changing.
-
I know what you want .. i have it in progress .. i show you buy next weekend ..
6 Mode .. On all LED on
Chaser LED IN pair
Chaser ONe LED at a time
Flash
On Only when the Butt is Pres
OFF
Oh yeah insted of the Tact I use the SYNC on the controller
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi167.photobucket.com%2Falbums%2Fu136%2Fkingmike_001%2FDSC03884.jpg&hash=f3cd34dc6866c6db56dcea4ca6db8297276d6758)
-
let me know when that is done i would like to use it in my controler in progress
-
wow king mike that is great that code sound like just wot i've bin lookin for!!!!
n yeah usin the sync t change mode is evan better then a extra tactile !!! :clap: :clap: :clap: :tup: