Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: mikespartian114 on August 09, 2009, 06:57:50 PM
-
what is the best paint that i can use. i have seen people use automotove paint and it comes out nice. i was wondering if there is anything close to that qulity that i can pick up at home depot or some hardware store or somthing?
-
Look for krylon fusion. Its for plastic. Here is a link of the product.
http://www.krylon.com/products/fusion_for_plastic/ (http://www.krylon.com/products/fusion_for_plastic/)
They should sell it at home depot. I know auomotive stores like auto zone and others sell it. Also sears if you have one of those around you.
-
Yes, try Krylon Fusion. That works best. Also Dye is good too.
-
the key to a good paint job (no matter what your painting) is the prep work, use a "scuff pad" to remove any of the shinny white finish from the factory, it should be dull when you start, next completly clean it with a degeaser, use rubbing alcohol if you must, make sure not to touch the surface to be painted with your fingers after cleaning (your hands have grease and oil in them) read the directions of the paint, follow them accuratly.
-
k thanks i bought this cheap stuff at walmart for like 99c a can and when i sprayed it it left bumps do u guys have any painting tips?