Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: atomicareprise on September 02, 2009, 02:16:35 AM

Title: lcd problem
Post by: atomicareprise on September 02, 2009, 02:16:35 AM

so i dismantle my psp last night...

and when i was about put it all back my lcd starts acting up...

when i put it on the lcd cage lines draw on the screen..

when i put it out of the cage the lcd is fine...

and also when i'm screwing back the faceplate its getting messy again..

what do you think is the problem?

Title: Re: lcd problem
Post by: FaT3oYCG on September 02, 2009, 03:06:29 AM

you havent put the cage in properly and it is all touching a ground probably because it isnt in right from the sounds of it.

Title: Re: lcd problem
Post by: DUKE on September 02, 2009, 10:50:59 AM

Double check the connections and like FaT3oYCG the LCD cage may not be in right, make sure the hook for the UMD door is pushed in al lthe way so the cage lays flat.

Title: Re: lcd problem
Post by: atomicareprise on September 03, 2009, 03:37:08 AM

i double checked everything..

the cage is in perfectly laid flat and the umd door is hooked just fine...

theres an instance that the screen works fine then when adding pressure

like pressing the home button it start acting up again...