Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: atomicareprise on September 06, 2009, 02:04:46 AM

Title: analog and dpad acting up
Post by: atomicareprise on September 06, 2009, 02:04:46 AM

i have a drifting analog...then i tried fixing the problem and it always coming back...

maybe i need to replace my analog..what i want to know is why is it that my dpad is

also acting up when my analog is messed up...i

s the analog and the dpad in some way related?

Title: Re: analog and dpad acting up
Post by: FaT3oYCG on September 06, 2009, 05:09:20 AM

phat or slim?

Title: Re: analog and dpad acting up
Post by: atomicareprise on September 06, 2009, 11:16:39 AM

its a phattie

Title: Re: analog and dpad acting up
Post by: FaT3oYCG on September 06, 2009, 04:46:54 PM

make sure it is screwed to the face plate as secureley as possible, check the dpad connector and clean the analog rubber pad, if it still doesnt work post back.

Title: Re: analog and dpad acting up
Post by: atomicareprise on September 10, 2009, 05:17:23 AM

still acting up buddy

Title: Re: analog and dpad acting up
Post by: FaT3oYCG on September 10, 2009, 11:26:48 AM

you can try direct soldering the analog to the contact pads with some 30 awg kynar wire but leave lots of extra wire as you would then have to be able to remove the face plate and be able to screw/unscrew it.

Title: Re: analog and dpad acting up
Post by: DUKE on September 10, 2009, 12:49:27 PM

Yeah the nub is not making full contact with the pads, I soldered mine because I had the faceplate on and off so much. As for the d-pad make sure the connection is nice and tight and the clip is down.