Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: atomicareprise on September 06, 2009, 02:12:00 AM
-
i have an lcd that don't have display on it...
i know its not the backlight fuse that has an issue coz my other lcd works...
what could be the problem of my lcd?
i have another cracked lcd and was wondering
can i replace the parts from my cracked lcd to the non-working lcd?
-
maybe but you dont know what parts arent working and it wouldnt be worth the hastle, basically its broken and that is the end of it there isnt much you can do to save a brken screen only fix a broken mobo.
-
The backlight is probably dead. Swap the backlight with the cracked LCD.
-
how am i going to swap my backlight of my lcd?i have a spare
cracked lcd but don't know how to swap the backlight..
-
The backlight is probably dead. Swap the backlight with the cracked LCD.
o_O please could you care to explain you comment.
-
Ok the LCD can be taken apart there is the backlight part and the liquid screen part. I was thinking of making video of this but then thought who would go through hassle to do so. But if your willing to try i will. Taking the LCD apart is not that hard depending how much patients you have and stability to hold things and crack them open without breaking it.
o_O please could you care to explain you comment.
What he meant fat was simply taking apart the cracked lcd he has and removing the backlight part from the cracked one and replacing with the backlight of the lcd he wants to use.
-
What he meant fat was simply taking apart the cracked lcd he has and removing the backlight part from the cracked one and replacing with the backlight of the lcd he wants to use.
Well now that makes sense lol, i was thinking wtf swap the backlight with the broken lcd wtf would that do XD
-
lol it happens sometimes takes me several time to read something and understand what someone is saying.
-
can you make a tut of swapping the backlight please...
that will help a lot..
-
Sure ill get to it.
-
The backlight is not that hard to take off. You just need to take off the back metal by prying the little clips on the side off.
-
when you pry the lcd from the lcd cage its the same thing, you pry the metal off the front (start at the bottom underneath the connector) of the screen that holds it in then hold the connector and pull (it is stuck down weakly by sticky stuff) and then the screen will come out, the thin part left with the plastic and second piece of metal is the back light repeat and swap, simplez.
-
i'll wait for blazinkaos tut...
is there soldering involved on it...
pics will be much appreciated guys..
-
i'll wait for blazinkaos tut...
is there soldering involved on it...
pics will be much appreciated guys..
You don't need to solder anything. It's just prying off the back and swapping them out.
-
No no soldering. :eyebrow:
-
i tried switching the backlight with my other cracked lcd...
that wasn't so hard at all..i thought it had some soldering involved on it..
bad news i think i damaged the working backlight...
i tried it and still there's no display...sigh!
i think i'll be needing a new one...
but still hoping for blazinkaos tut so the next time i'll be switching i'll know what to do..
-
I am uploading it now should be up shortly.
Post Merge: September 25, 2009, 03:36:57 PM
Here you go. PSP Disassemble LCD to Back Light TUT (http://www.youtube.com/watch?v=z8cCjN52eJg#normal)
-
thanks for the video buddy
-
Anytime hope it helps you.