Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: asciicat on September 18, 2009, 10:02:30 PM
-
(Actually I am surprised I made it this far! :drunk:)
I need to get the power plug out, but it seems impossible. I have removed the lcd case and dpad, and need to remove the speakers before the power plug
I am trying to get to the WiFi switch because it is broken. Then I will solder it and bridge the connection so its permanently on
SOLVED!! I HAVE REMOVED THE MOBO AND AM SOLDERING IT TOMORROW AS I HAVE TO READ 200 PAGES
-
tweesers or small pliers. but be gentle the first time out is the hardest, and make sure to pull the plastic part and not the wires.
Do not pull the outlet itself but the part thats smaller than outlet.
as for the power plug loosen the screw by the plug and the mobo should give enough to lift slightly and pull the power plug from the socket
-
oh, you click quick reply... Btw this is my first time, (before I only removed the faceplate)
k, trying it now, i see it moving
What about the one above the bronze plate that says Hitachi Cable?
[edit] YES! GOT BOTH (speakers)! now the power one
[edit] GOT THE POWER ONE!!
-
PM sent, hope this helps, i will be on for a while if you need more.
-
Ok I got it, thank you. Its getting late so I probably will go to bet soon (45 mins ish)
-
no problem glad i could help.
-
Alright this: in step 9, picture 2, the big red circle, with the umd laser ribbon, you lift the white part tab out or what
http://www.llamma.com/PSP/repair/complete_psp_disassembly.htm (http://www.llamma.com/PSP/repair/complete_psp_disassembly.htm)
-
for that one you pull the black part on both sides evenly to the right.
and the clip needs to be out when you put it back in then push the clip in the same way.
"do not pull on the white part"
-
God, do you use your fingers, fingernails, or tweezers?
(also should you wear gloves?)
[edit] my eyes are hurting and its not even 11, im getting off very soon :faint:
[edit2] PLEASE HELP! I cant get this umd flex cable out
-
finger nail, small screw driver, something of that sort. wiggle one side then the other little by little till the cable slides out.
-
i have finished and updated 1st post
will solder tomorrow
[EDIT1] ahh, nothing like the sweet smell of liquid metal in the morning :tup:
[EDIT2] I Drilled a hole in the L shoulder but it is too close to the black thing but my dad said he can fix that
(I edited the pic from llamma.com)