Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => Topic started by: PspKicks316 on October 10, 2009, 07:15:09 PM
-
Preferably ones that don't include reflowing...
I already did an xclamp fix (had to get rid of my 3 ring rrod)
-
i know its not the same but i fixed a e74 with a old heat sync from a video card and put it on the HANA/ANA chip with a little thermal paste.
-
from my sticky thread
"E73: General Hardware Error: Ethernet port... this error is caused by a problem with the Ethernet port."
-
I guess I could try putting a heatsink on.
Where's the ethernet chip? I might try reflowing it today.
from my sticky thread
"E73: General Hardware Error: Ethernet port... this error is caused by a problem with the Ethernet port."
I asked how to fix it not what it is.
-
Haha it's not an ethernet problem...That's just off and all those error code list's are NOT accurate. Based on what lil timmy and johnny thinks it is.
The only way you're going to get rid of the E73 error is re flowing the board. I know it's not what you want to hear but replacing the x clamps will do nothing for you what so ever.
If you don't want to re flow it, I will do it for $34(return included)
-
Eh nah. I'm using the 360 for parts and the motherboard as a test board for an upcoming project I'm working on.
This thread is basically useless now XD
-
That's the way to do it mang....