Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: IFeelYourPain on October 11, 2009, 01:41:05 PM
-
I just want to put 2 LEDs in my PSP Slim. One in each trigger, but the tutorial I am following found on llama is of no help. I've got the LED's wired into the triggers and tested them, but when it comes to putting them on the resistor and the motherboard... The tutorial stops being helpful.
-
The tutorial was meant for the phat so the slim a little different. Do you want the LEDs to just stay on or sound reactive?
-
The tutorial was meant for the phat so the slim a little different. Do you want the LEDs to just stay on or sound reactive?
I find sound reactive annoying. I just want it solid. I tried connecting the LEDs to the green power LED, but it makes the green LED dim, though it will power my blue trigger LEDs. I also couldn't use a resistor. I tried... all it did was my the trigger LEDs really dim though the green led was fine.
-
You need to connect to the 5v source above the memory stick LED.