Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: Thorax on October 13, 2009, 04:05:03 PM
-
I have just about finished my 2nd modded PSP except I have one major problem. For some reason, the analog automatically drifts down and right as fast as it can go. I know this is a contact problem, but I can't figure out a fix for it. I've tried multiple rubber pieces and analogs and they don't work. If I solder 4 wires directly to the 4 contact points, will that fix it? Also, is there any other way to fix it?
-
Try to screw it down as tight as possible. If that doesn't work you need to solder it together.
-
Try to screw it down as tight as possible. If that doesn't work you need to solder it together.
I did that with multiple analogs and rubber connectors. I guess I'll start soldering and see if that works. If it doesn't, it's a mobo problem, right?
-
solder it in.
it is probably beacuse one of the contacts isn't touching the rubber piece.
-
I did that (Cleanest soldering job I've done) and it's still going down and right at full speed. I'm guessing it's a mobo problem.
-
When you take the joystick off and press on the contacts, the arrow will move around. I had the same problem and it was because the faceplate was too loose.