Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: slampen08 on October 29, 2009, 06:16:43 AM
-
Dam... any ideas on how to fix this? the clamp snapped in half
-
You need a new motherboard or new connector if you can solder it some how.
-
put a small piece of electrical tape ontop of the screen connector and gently force it into the slot, then get a pencil and use the eraser to gently push down on the gold pins once completed it should work just fine, you just wont be able to remove the screen again unless you do this method all over again
-
put a small piece of electrical tape ontop of the screen connector and gently force it into the slot, then get a pencil and use the eraser to gently push down on the gold pins once completed it should work just fine, you just wont be able to remove the screen again unless you do this method all over again
Thanks i'll give it a go. I realy laughed at gently force
Post Merge: October 30, 2009, 05:04:35 PM
i dont understnd what you mean by where to put the tape?
-
did you break the whole thing or just the black bit?
-
on top of the LCD ribbon, where you would usually plug in the LCD to the motherboard