Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: akomismo01 on November 01, 2009, 12:55:59 AM
-
Can someone help me?.. my problem is the copper contacts on my analog is ripeed off :sadno:.. ihow do i connect it again?.. im wiling to try to solder it directly to the analog using wires.. but is there another alternative analog in outs?.
-
Nope, the only way is to hard wire it back.
-
how?.. to connect it again?..:(
-
:censored: :censored: :censored: :censored: :censored: :censored:
-
wire it like this
make wires short or faceplate wont go down all the way
i had to go and shorten mine :(
Yea just like that, but make the wires shorter 4 sure. Also, trim the lcd cage part where the analog rests. It will make the psp faceplate have less of a chance to pop off or lift away from the psp.Also, dont screw in the analog.And last whenever you take off the faceplate to mod something else, remeber to take off the cap first or the the wires will tear.
If that makes sense lol
-
thanks for the help dude.. i tried the one like W-Gaming5 but i had a hard time soldering.. the solder always does not stick to the contacts left after the copper contacts went off.. and sometimes the solder will stick to another because the space is too small.. any soldering ideas?.. i manage to look in the soldering teknicks but ive got nothing.. thanks for helping..
i just finish my Sound reactive mod but because of the wires the lcd cage is lifting a little bit becase i wired it to the left speakers and i wired 6 leds on it.. :boxed:
-
Ok, well I recommend using less solder and lots of flux, makes the job way easier
Also, Try make your wiring job go under the psp, can make it alot cleaner this way
-
if you cant do it then pay someone who can to do it for you.
-
what kind of flux do you use to make it easier?.. when i bought mine it is labeled flux grease and its color is white?.. i see some people here uses the grey flux?.. what is their difference?.. which one do you recommend?.
-
i did that to my nephews psp...soldering is easy..putting it back is the hard part...
text me kabayan so that i can help you...09054913091..
-
:censored: :censored: :censored: :censored: :censored: :censored:
-
we dont have radioshack in our country.. i will try to get help with atomicareprise he's in our country.. i will just contact him.. thanks for the help folks..:)
-
you can buy flux in our local electronics shop...
if you have DEECO in your town just ask for one..
they sell it for 25 pesos...
if you need more help don't hesitate to contact me.. :tup:
-
thanks everyoone.. i already did it.. last week and its a success.. thanks..
-
wire it like this
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi37.tinypic.com%2F29dv08x.jpg&hash=2b0e4b23e9e819a1f19556dd935b5686f86e6edb)
make wires short or faceplate wont go down all the way
i had to go and shorten mine :(
i'm going to have to do this... i've been using super glue to keep faceplate down, but now it's not working anymore.
tried screwing my psp tighter and that doesnt help... will do this mod right after i finish the led trigger sound reactive mod.... that was what cause my analog stick to not work...taking off the faceplate..
but this isn't really that much of a biggy. will be so much easier than trying to solder to teeny tiny leds smds