Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: TR4G- on December 06, 2009, 03:24:23 PM
-
i have a xbox 360 wired controller, minus the adapter to the xbox itself. Cani make one myself by just taking off the circular connector and soldering it to a male usb? which wires would i solder together? seems pretty easy, i just dont know which wires should go to which
-
uh, I will have to check when I get home, but I didnt think they came apart like the origional xbox did, IDK I only have one and never used it.
if so, a simple continuity test through the adapter would tell this, and there is only 4 wires in the use plug, power,ground, data+and data-
-
yah you sould be fine as long as your connections are correct as all it is is wire.
-
right, but i dont have the adaptor, so i dont know which wire goes to which pin on the xbox's female usb. so thats why i need someone to check theirs out or pull a pinout up. thanks
-
ok I only have one wired controller and its the wife's, she swares they are more sinsitive then the wireless ones...women..lol anyway, she wont let me cut it open to get the color code. but I did an external pin test for you and have drawn a diagram
I am no artist laugh if you want. I did
-
TR4G i have the adapter but no controller, Do u want it?
-
Matt I love home made schematics lol! Post it up.
At aziz1 that would be great! I'll Pm you
-
it is posted, it is a pdf and attached to my previous post above ^^
-
I can't open the attachment...
-
its a standard pdf ?
-
ah thanks man. Ill try it out tomrrow!
-
The attachment is fine.
Also, that "IDK" part is a choke. It reduces Electromagnetic and Radio Frequency Interferences (EMI and RFI respectively)