Acidmods

Acid Mods Community Area => Discussion Boards => General Discussion => Topic started by: lakrulez14 on December 10, 2009, 10:17:23 PM

Title: Looking to find a few products
Post by: lakrulez14 on December 10, 2009, 10:17:23 PM
ok ive been searching google for the past two days now for these 3 items but cant find them so i came to the experts  :tup:

First item:
im looking for a lcd screen.
max size 7.5x5 inches
min size 5.5x3 inches
not too thick, about the size of the ones in picture frames

Second item:
2.5mm output jack (mic jack)
one i could use in a hobbie

Third and last item:
3.5mm output jack (headphone jack)
one i could use in a hobbie

if anyone could find any of these items i will be very grateful.
thx in advance
Title: Re: Looking to find a few products
Post by: ModderDmo on December 10, 2009, 11:21:55 PM
You will most likely find most, if not, all of those on eBay. This is usually my next step if I can't find anything on Google.
Title: Re: Looking to find a few products
Post by: pigoesfar on December 11, 2009, 02:54:57 PM
I would highly recommend digikey.com.  They have tons of specialty parts.
Title: Re: Looking to find a few products
Post by: DarkShot on December 11, 2009, 03:17:02 PM
Sparkfun.com might have the LCD you're looking for. You'll have to take a couple mins and browse around. The other parts you're bound to get anywhere at any electronics/tinkering store or site.
Title: Re: Looking to find a few products
Post by: lakrulez14 on December 11, 2009, 05:24:37 PM
ok thx i found the 2.5mm and 3.5mm jacks, i found the lcd i needed but now another question pops up, how would it be possible to wire up a lcd module to a/v cables? would i HAVE to buy a lcd controller or is there a cheaper easier way to do it?

Post Merge: December 11, 2009, 09:37:56 PM
ok ive found a few screens but i need a way to make them work with this: http://www.simsimgate.com/1-2ghz-wireless-transmitter-receiver-80m-range-752 (http://www.simsimgate.com/1-2ghz-wireless-transmitter-receiver-80m-range-752)

Here are the screens
This one:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280435832395&ru=http%3A%2F%2Fshop.ebay.com%3A80%2F%3F_from%3DR40%26_trksid%3Dp3907.m38.l1313%26_nkw%3D280435832395%26_sacat%3DSee-All-Categories%26_fvi%3D1&_rdc=1 (http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=280435832395&ru=http%3A%2F%2Fshop.ebay.com%3A80%2F%3F_from%3DR40%26_trksid%3Dp3907.m38.l1313%26_nkw%3D280435832395%26_sacat%3DSee-All-Categories%26_fvi%3D1&_rdc=1)

This one:
http://www.getpartsonline.com/b089aw01.html (http://www.getpartsonline.com/b089aw01.html)

If someone can explain the way on how to make any of those screens work on that A/V transmitter/receiver I would greatly greatly appreciate it.
SimplePortal 2.3.5 © 2008-2012, SimplePortal